Drawing-based quotations PDF and STEP accepted
Home / Products / Studs

ASTM A193 · Grade B7

B7 threaded studs.

Order to the approved thread, length datum and finish. If nuts belong in the set, list their grade and quantity on a separate line.

Quote B7 studsBuild a quote line ↓
Assembly study · Threaded stud with two mating nuts

Drawing inspection

Inspect the geometry.

Select a point on the specimen and enter the callout from your drawing. Carry your notes into a quotation.

ASTM A193 · Grade B7Inspect 2H nut ↗
Helical thread and end faces of a fully threaded stud in a metallic finishHelical thread and end faces of a fully threaded stud with a matte surface to show the profileIllustrated geometry

Detail A

Where is length measured?

Identify both measuring points and the length on the approved drawing. Give the units.

Purchasing specification

What to put
on the RFQ.

Stud material
ASTM A193 Grade B7. Include the edition and any supplementary requirements.
Thread geometry
Diameter, pitch or threads per inch, series, class and end detail.
Length
Mark both measuring points and state whether end chamfers are included.
Mating pieces
Identify the nut specification, grade, form and quantity per stud.
Documents
Specify the lot identification, material report and inspection records required for acceptance.

Drawing detail

Where does length start?

Locate both arrows on the end faces when the drawing specifies overall length.

Drawing enquiry

Build your
quote line.

Set the piece count here. Add the drawing, destination and thread specification on the next screen.

RFQ lineB7 threaded studs